Water Treatment

Galli Flocculators: a complete line for the study of the separation of pollutants in wastewater and transfer studies in the environmental sector.

products

Construction features GAutostill
  • Construction entirely in satin stainless steel
    “Scotch Brite” AISI 304 for maximum hygiene
    of use, corrosion resistance and ease of cleaning.
  • Easily separable upper cooling body
    from the lower boiling chamber to allow
    periodic cleaning and descaling.
  • Preheating of inlet water supply
    through the cooling dome, reduces consumption
    of energy.
  • Height-adjustable non-slip rubber feet.

 

Standard equipment
  • General safety magneto-thermal switch
  • Level safety device, in case of lack of water in the boiler or insufficient flow, it interrupts the heating, with automatic reset.
  • Incoloy armored resistors for maximum durability.
  • Water supply inlet tap pre-set in the factory and adjustable if necessary
  • Equipped with plastic pipes for water drainage and for the exit of distilled water.
  • Documentation: Manual, Warranty Certificate, CE Declaration
  • Made in Italy

 

GDEMI 5000 series demineralization systems, with digital conductivity meter.

Fields of application

Accumulators, batteries;

Aquariums;

Autoclaves;

Salt Mists;

Climate Cells;

Research and analysis laboratories;

Hospitals and clinics;

Restoration;

Galvanic, electronic, cosmetic, chemical industries.

Operating Principle

The incoming water passes through a mixed bed of high exchange capacity resins that block cations and anions. This results in high purity water with an average conductivity of 0.2 μs/cm.

Construction

Reinforced composite material column,
¼” 30L connections.
¾” 50L connections.

Made in Italy

The GDEMI 5200 series demineralization systems are ready for use immediately.
Complete with stainless steel frame, inlet and outlet filters,
Digital conductivity meter and quick couplings.

Fields of application

Accumulators, batteries;

Aquariums;

Autoclaves;

Salt Mists;

Climate Cells;

Research and analysis laboratories;

Hospitals and clinics;

Restoration;

Galvanic, electronic, cosmetic, chemical industries.

Operating Principle

The incoming water is first filtered to block the coarsest particles, then it passes through a mixed bed of high exchange capacity resins that block cations and anions. This results in high purity water with an average conductivity of 0.2 μs/cm. A second filter further protects the entire circuit.

Construction

Stainless steel load-bearing structure;
Stainless steel resin column;
Input Filter and Output Filter;
Quick attacks;
Conductivity meter with LED to indicate resin efficiency.

Made in Italy

The Original Galli GFlokku Multiple Flocculation Stirrers are instruments for studying the separation, Jar Test , of pollutants in waste water and transfer studies, Leaching Test , in the environmental sector. They are therefore used in the Laboratory and with the portable GFlokku model in the field. Sectors Water, Sludge, Purification, Waste Water. Biological, Industrial and Research.

The Original Galli GFlokku Multiple Flocculation Stirrers are instruments for studying the separation, Jar Test , of pollutants in waste water and transfer studies, Leaching Test , in the environmental sector. They are therefore used in the Laboratory and with the portable GFlokku model in the field. Sectors Water, Sludge, Purification, Waste Water. Biological, Industrial and Research.

Info

Requests?
Contact us now, we will reply as soon as possible

Fill out the form here, entering your data and the description of your request.

You will save time on your next information request!